Corbeau Seat Bracket

Corbeau makes this seat bracket to be a high quality replacement for the factory installed seat bracket in your Jeep Wrangler.  It is made from sturdy and durable materials like aluminum and it features a stylish and sleek finish in black.  This seat bracket is meant for use on the front seat.

This is a replacement part of high quality and it will allow you to be able to quickly and easily install a new seat in the front of your Jeep.  It comes to you complete with a built in slider that locks in order to give you the full factory original performance.  It also features a style that is easy to be bolted on to make installation simple.

Features at a Glance

·         This seat bracket is meant to be used on the Jeep Wrangler JK with a model year falling between 2011 and 2015

·         This bracket is meant to be used with Corbeau seats

·         Locking slider built in

·         Black finish

·         Made from aluminum

Inflatable Lumbar Support

Corbeau makes these lumbar supports that are a simple and incredibly affordable way for you to get that additional support that your lower back is screaming for.  This is an inflatable bladder that can be installed underneath the cover of the vehicle seat.  It is deflated and inflated by using a hand pump that is connected to the bladder.  This lumber support is not compatible with the following seats:

·         Pro Series

·         Sprint

·         FX1 Pro

·         Sportline

·         VX2000

If you happen to be ordering a Corbeau seat at the same time that you order the lumbar support, Corbeau will go ahead and install the support in the seat for an additional charge.

Seat Savers

Corbeau knows that you want to be able to protect your seats and keep them looking great for as long as possible.  For this reason, they have made the seat savers.  These are made from a material like canvas and they slip right on to your seats in just a few seconds.  If your rig is exposed to the elements on a regular basis then this is the ideal way to save your seats.

Many times, these seat savers are left on the seats even when the rig is being driven.  That being said, they are not equipped with cut-outs for the harness belts.  The reason for this is simple: there are no cut-outs because any type of cut-out would leave an opening for water to get in to the seats.  Therefore, if you want to drive with these still on your seats, you will need to cut openings in them for the harness belt(s).

Currently, there are not form fitting savers for the following seats:

·         Baja RS

·         Sport Seat

·         GTS II

Corbeau Seat Heater

The universal system that Corbeau has for heating seats is the absolute highest quality heating units for seats that is on the market today.  For those of you who have experienced how luxurious it can be using a seat heater will know that once you have used one, you need to have one all of the time. 

Corbeau has now made that possible and at a price that is quite affordable.  The Seat Heater that is made by the minds at Corbeau are able to be installed in either your Corbeau seats or your factory installed seats.  It is recommended that the installation process be completed by a professional but if you are a handy type of person then you can probably take care of the installation by yourself.  There are only two wires used – a ground wire and a positive wire.  These need to be connected to your factory installed electrical system. 

One of the great things about this seat heater is that it only takes about 2 minutes for it to start warming you up.  There is a heat flow system used for these seats that is patented by Corbeau.  This system forces the heat to only go up as opposed to going back into the seat.  For this reason, your body will be able to feel most of the flow of heat and will thereby get warmer faster than it would with other types of seat heaters.  The heating pads that Corbeau uses for these seat heaters feature a type of technology called carbon fiber.  This is thought to be the best material for heating pads that can be found.  The seat heaters that are made by Corbeau are custom ones that can be cut to size so that you get the proper fitment for your seat. 

That being said, there are some seats that are not compatible with this seat heater.  They are the:

·         Classic

·         Classic II
Clubman

·         Pro-Series

·         Sprint

·         Forza Sport

·         Forza FX1

·         VX2000

If you happen to be ordering Corbeau seats at the same time that you order the seat heaters, you can have Corbeau install the heaters on the seats for an additional charge.  This way, the seats will get to you already having the heaters installed and ready to be wired straight to the electrical system in your vehicle.

Features at a Glance

·         Highest quality heating units for seats on the market

·         Can be installed in your factory installed seats or in Corbeau seats

·         Very affordable way to stay warm when you are on the trails in the winter

·         Installation is simple but still recommended to be completed by a professional

·         Heater is warm within 2 minutes

·         Made with cutting edge patented technology

Corbeau Wrangler Baja XRS Seats

The Baja XRS is a suspension seat for the Jeep Wrangler and it is made by the minds at Corbeau.  This is one of the most highly anticipated aftermarket seats that has even been made for the Jeep and the off road community.  The reason for this is because Corbeau had an advertising campaign that asked enthusiasts to assist with the design of what they thought would make the utmost it terms of a reclining suspension seat.  The campaign was a success and people from all over the world sent in their designs and ideas. 

Back in 2008, Corbeau changed the suspension seat game with the introduction of the Baja RS which was the first ever reclining suspension seat.  Then, in 2011 Corbeau realized that this still wasn’t the ultimate in terms of a seat of this type.  When people hear the term “suspension seat” the first thing to come to mind is typically off road driving.  That is because off-roading was the original reason for a suspension seat.  The thing is, Corbeau wanted for those people who are not into the off road scene to also be able to experience how much comfort a suspension seat can offer while they also wanted something more to satisfy the needs of their off road customers. 

The purpose of a suspension seat is to absorb the impact that otherwise would go straight to your back while you are driving…especially over all of those bumps that are inevitable with the off road lifestyle.  So, Corbeau decided to combine the suspension technology that they use with a type of memory foam that is injection molded to make this seat.  Most of the time, suspension seats utilize a type of foam that is cut.  This type of foam will easily wear and leave your legs and back paying the price. 

The Baja XRS uses a type of foam that is injection molded.  This, in conjunction with the Corbeau technology for suspension provides support and comfort that is unmatched and this will last for quite a long time.  This seat has been made to be a direct bolt in part for most of the Jeep Wrangler YJs, CJ7s and CJ5s.  In addition, with the addition of the Corbeau seat brackets it will fit in any other type of rig.  It will accommodate a person with a waist size of up to 42 inches.  You can get this seat in black vinyl or a combination of black vinyl and black cloth.

Features at a Glance

·         Made with a type of memory foam that is injection molded

·         Can fit in any vehicle with the Corbeau seat brackets

·         Uses the famous Corbeau technology for suspension seats

 

Corbeau Seat Bracket and Slider

The Corbeau seat bracket and slider is made from durable materials that will ensure safety as well as the proper fitment of the amazing Corbeau seats.  The seat bracket and slider has been given a durable finish in black that is quite stylish and it also protects the bracket and slider from rusting prematurely.

This is a replacement part that is high quality and it will allow you to be able to install that new Corbeau seat quickly and easily in your Jeep.  The bracket comes to you complete with a slider built in to it so that you get the performance of a factory original seat.  It also has a bolt on that is meant to be used to give you further assistance with installation.

This seat bracket is meant for use on the Jeep Wrangler JK with a model year falling between 2007 and 2015. 

There are also Corbeau brackets that feature two sliders.  These brackets are meant for use on vehicles that are regularly driven in aggressive sanctioned competition.  These double locking sliders that are made by Corbeau add to the rigidity because they add an additional locking pin right to the opposite rail of the bracket.  Unless otherwise requested, you will get a single locking slider with the bracket.  If you want the double locking slider then you must request it.

Corbeau is a company that has the largest supply of custom made seat brackets in the automotive industry.  When you buy an aftermarket seat for you rig, the worst thing that you can do is listen to the sales person who will encourage you to buy one of their “universal” seat brackets.  In reality, you might need to make some major modifications for these “universal” brackets work…if they will at all.  For an aftermarket seat to be able to properly work in your rig, you will need a custom made bracket.  If not, and you do manage to get the seat into your rig, it will be at a rather odd angle or even too high.

Corbeau knows that when you have purchased an aftermarket seat for your rig, you want to be able to bolt it in and go.  They are the only company that stocks brackets for nearly every single vehicle that has ever been made.

Features at a Glance

·         These seat brackets and sliders are easy to install

·         Simply bolt the seat bracket and slider in to the factory installed bolt holes in your rig

·         The bracket comes with a single locking slider but you can get the bracket with a double locking slider upon request

·         These brackets and sliders can be used to bolt any aftermarket seat into your rig with no hassle

Corbeau Moab Recliner Front Seats

The Moab is a reclining front seat that Corbeau makes for Jeeps.  It has been designed in such a way that it can simply be bolted in to the YJ and CJ Jeeps but it is still compatible with other vehicles as long as you also have the custom Corbeau brackets.  The thing about the factory installed seats in Jeeps is that they can and do wear out pretty quickly…especially for Jeeps that tend to hit the trails quite frequently.  Additionally, they do not give you enough lateral support when you happen to be on the trails.  For this reason, Corbeau decided to take a closer look at these factory installed Jeep seats and they improved on the design and then upgraded it with slots for the harness (es) as well as more bolsters that are comfortable and aggressive.  The end result was the Moab.  

The thigh bolsters in the Moab are moderate which means that getting in and out of your Jeep is still easy.  However, they do provide just enough support to cut down on body shift while you are driving.  The Moab is filled with Corbeau’s cutting edge injection molded foam and it is also harness capable.  For those who would like a harness belt with 5 or 6 points, it is possible to add an anti-submarine slot.

This seat is available in charcoal, spice, tan and black that will match the factory colors of the Jeep.  There is also a Safari seat that matches the Moab.  The Safari is a bolt in product for the YJ and the CJ.  You can get the Moab in your choice of vinyl, neoprene or a mixture of vinyl and cloth for the upholstery and it will accommodate a person with a waist size of up to 40 inches.  As far as color – material combinations go, they are as follows:

·         Spice neoprene

·         Black neoprene

·         Black vinyl with grey cloth

·         Grey vinyl and cloth

·         Spice vinyl and cloth

·         Tan vinyl and cloth

·         Black vinyl and cloth

·         Grey vinyl

·         Spice vinyl

·         Tan vinyl

·         Black vinyl

The Moab also has a reclining mechanism that is fingertip controlled.  This will allow for you to be able to adjust the seat in order to find the sweet spot.  With the Moab, you will get incredible lateral support as well as minimized body shifting and as a result, driver fatigue will also be lessened.  This is all due to the bolsters in the seat.  There are harness slots that will accommodate either a 3 or 4 point harness to ensure that you stay safe.  The back of the Moab features a map pocket so that you can store small essentials and still have easy access to them.

Corbeau Jeep Wrangler Baja JP Seat

This seat is basically the same seat as the Corbeau Baja SS.  It is a fixed back suspension seat.  The difference between the two seats is that the Baja SS is equipped with 4 vertical tabs.  These tabs are what allows for the SS to be bolted to a roll cage.  This seat – the Baja JP – does not have those tabs and can be mounted to a flat surface.  There are two other differences too.  One is in the pattern of the stitching and the other is the harness slots.  Now, the Baja SS can still be mounted on a flat surface as long as you have the Baja Adapter.

The Baja JP suspension seat is a direct bolt on component for the Jeep YJ, CJ7 and CJ5.  That being said, the factory installed brackets in the CJ are set at an angle which means that if you bolt the Baja JP to these brackets, it will also be a an angle that is quite extreme.  For this reason, it is recommended that you use the custom made CJ brackets unless you want to continuously be reclining in the seat.  This suspension seat is also compatible with any vehicle as long as you use the custom Corbeau brackets. 

Just as with all of the suspension seats that are made by Corbeau, the JP features the cutting edge suspension system that Corbeau is so well-known for.  This particular system has been proven to provide cushioning that is superior as well as energy return on impact that is significant.  Essentially, the system makes a sort of trampoline effect.  This allows for it to absorb the impact that would otherwise be absorbed in your back.

The JP is available in a combination of vinyl and cloth or on all vinyl that is black.  This seat will accommodate a person with a waist size of up to 38 inches.  The wide version will accommodate a person with a waist size of 42 inches.  That said, the total width of the wide version is not as wide as with the regular version.  This is due to the bolsters in it being less aggressive in order to make it more comfortable for a larger person.

Features at a Glance

·         The Baja JP is a suspension seat with a fixed back that is made to fit the Jeep Wrangler JK, TJ and YJ with a model year falling between 1987 and 2015

·         The Jeep Wrangler JK and TJ will require the adapter brackets to ensure a perfect installation

·         The Bake JP is available in either all vinyl or a combination of vinyl and cloth.  Both versions come in black.  The materials for the upholstery are automotive grade

·         The construction of the frame is from tubular steel that is quite durable

Corbeau Baja SS Fixed Back Seat

The chances are good that if you are driving off road, in the mountains or at the sand dunes, you will see a rig that is equipped with Baja SS seats.  The Baja SS was Corbeau’s original suspension seat.  For many years, this particular seat has managed to raise the bar while it also lowered the price for suspension seats that are equipped with a fixed back.  The Baja SS features the state if the art technology for suspension seating that Corbeau is known for along with a design and level of comfort that can only be had with a Corbeau made seat.  Their experience with making performance seats and their expertise when it comes to the comfort of seats are what makes this off road seat the most technologically advanced one on the market today. 

This fixed back Baja SS seat is equipped with four tabs on the bottom of it.  These tabs are vertical.  These tabs are what allows for the Baja SS to be bolted directly to the roll cage.  If you happen to be wanting to bolt the seat to a flat mounting surface or a Corbeau bracket then it is recommended that you go with the Baja JP instead.  Essentially, the Baja JP is the same exact seat as the Baja SS with the only difference being that the JP is not equipped with the four tabs on the bottom of it.  That being said, you can still get the Baja SS if that is your heart’s desire.  Just order the Baja Adapter along with it.  This adapter will need to be bolted to the bottom of the Baja SS in order to form a flat surface for mounting that essentially takes the vertical tabs out of the equation. 

You can get the Baja SS in your choice of all vinyl or a combination of vinyl and cloth.  The Baja SS is made to fit people with a waist size of 36 – 38 inches.  As far as color goes, you can choose from:

·         Black vinyl

·         Grey vinyl

·         Black vinyl and cloth

·         Black vinyl and blue cloth

·         Black vinyl and red cloth

·         Grey vinyl and cloth

Feature at a Glance

·         The Baja SS is meant to fit the Jeep Wrangler JK, TJ and YJ with a model year falling between 1987 and 2015

·         JK and TJ models will require the adapter brackets

·         The Baja SS has a fixed back

·         The Baja SS comes to you complete with slots for the harness belts

·         This seat is also equipped with bolsters for the shoulder, kidney and thighs

·         The vinyl material is colorfast which means that it is resistant to fading

·         The frame of this seat is tubular and quite sturdy